BBQ Grill Plans

  • 24" by 36" Santa Maria BBQ Grill
    24" by 36" Santa Maria BBQ Grill
    This BBQ Grill is built using 10 gauge or heavier flat steel plate. We can help you change the dimensions around to fit your needs. simply call us at 573-612-1315 anytime. All of the hardware is the same only the steel cuts are different. You could even use 1/4" plate to build it square and make it wider. The hardware would be the same. This BBQ Grill is built using 10 gauge or heavier flat steel plate. We can help ...
  • Pawl Ratchet assembly for Santa Maria Grill
    Pawl Ratchet assembly for Santa Maria Grill
    This is the Pawl Ratchet assembly for use with the Santa Maria Grill Plans if you dont want to use the sprocket system shown on the plans. We cut this assembly out with our CNC plasma table. It is bored for 1/2 inch roundbar. The gear diameter is approx 6 inches. This is the Pawl Ratchet assembly for use with the Santa Maria Grill Plans if yo...
  • 30 by 48 Santa Maria Grill
    30 by 48 Santa Maria Grill
    This BBQ Grill is built using 10 gauge or heavier flat steel plate. We can help you change the dimensions around to fit your needs. simply call us at 573-612-1315 anytime. All of the hardware is the same only the steel cuts are different. You could even use 1/4" plate to build it square and make it wider. The hardware would be the same. This BBQ Grill is built using 10 gauge or heavier flat steel plate. We can help ...
  • 38" diameter Santa Maria BBQ Grill!
    38" diameter Santa Maria BBQ Grill!
    38" diameter Santa Maria BBQ Grill!!! This BBQ Grill is built using an endbell from a 38" diameter propane tank. Don't have one??? NO PROBLEM! You can use anything anysize! We can help you change the dimensions around to fit your needs. simply call us at 573-612-1315 anytime. All of the hardware is the same only the steel cuts are different. You could even use 1/4" plate to build... 38" diameter Santa Maria BBQ Grill!!! This BBQ Grill is built using an en...
Weld on bullet hinge- 4 inch
Weld on bullet hinge- 4 inch
This is our preferred style of hinge for doors on large offset and rev
$5.50
SinglePan Vertical Pellet Smoker Plans
SinglePan Vertical Pellet Smoker Plans
This set of smokerplans is a must for the pitmaster who needs a set it
$79.00
Weld on bullet hinge- 3 inch
Weld on bullet hinge- 3 inch
This is our preferred style of hinge for doors on large offset and rev
$3.99